Advanced switches on this page.
Default installation path for S|C modules: ...Mix/Switch/
Default installation path for Flexor modules: ...Tools/Switches/
Switching occurs whenever a gate message is received.
Fade control to smoothen transitions.
Sync switching: switching occurs whenever a signal connected to Sw input exceeds
the respective threshold level.
Switching occurs when appropriate MIDI note events are received. Example for [BaseNote]
C3: C3=>swOut1; C#3=>swOut2 etc. dspLoad 18.50/15.20/15.30
SyncSw1x4knb: same functionality as LevelSw1x4
SyncSw1x4: threshold is determined by mod inputs. dspLoad 9.10/5.80/5.80
Sync switching: switching occurs whenever a signal connected to the little Ctrl in
input exceeds a given threshold, controlled by the CtrlT potentiometer. Uni/Bipolar
button for threshold signal.
If In1 is within (min-max) range, it is sent to output. If not, In2 is sent to output.
Sync switching: Min and Max values can be externally controlled by sync signal. CWM
ISync switching: switching is done externally by (bipolar) signal connected to Ramp
Mod1to2: dspLoad 1.70/1.70/4.90 Poly: 16
Mod1to4: dspLoad 6.60/5.80/4.60 Poly: 16
Mod1to8: dspLoad 13.60/10.50/10.40 Poly: 8
Mod1to16:dspLoad 25.30/22.00/22.10 Poly: 4
Mod2to1: dspLoad 2.40/5.60/2.30 Poly: 16
Mod4to1: dspLoad 9.70/6.50/6.50 Poly: 14
Mod8to1: dspLoad 15.60/12.30/12.30 Poly: 7
Mod16to1:dspLoad 28.30/25.20/25.10 Poly: 3
Sync switching: switches if a given threshold of a control signal connected to [Switch]
has been reached.
Threshold itself can be modulated.
ThrSw1to2: dspLoad 2.40/5.60/2.30 Poly: 16
ThrSw2to1: dspLoad 3.10/6.20/3.10 Poly: 16
Switching occurs when appropriate MIDI note events are received.
dspLoad 2.20/4.20/3.50 Poly: 16